3PH TEFC 60/50 Hz AC Foot Mounted (B3), C-Face (B34 and B34/1) and D-Flange (B35) Metric IEC Motors
Metric IEC Motor Features
Inverter Duty Rated: 5:1CT & 10:1VT at 460V 60 Hz
Service Factor: up to 1.2 at 460V 60 Hz
Design: “N” or “H”
Protection Degree: IP55
High lock rotor torque
VPI process applied for best electrical performance
IEC132 frame and larger suitable for Y/Delta starting
Electromagnetic compatibility standards:
EN 50081-1(2) and EN 50082-1(2)
Nameplate rated 230/460V 60 Hz and 380/400V 50 Hz
Oversized ball bearings on both ends for direct coupling
Class “F” insulation
Junction box equipped with glands
F3 mounting position
Drilled and tapped end shaft
All Metric IEC motors provided with CE mark
Applications: IEC motors are designed to meet international standards as replacement metric motors for overseas applications and machinery such as pumps, conveyors, fans and more.
Elektrim IEC Frame Metric motors are designed to meet international standards (including IE3 efficiency requirements) and are “the” replacement motors for overseas applications and machinery components. Dual rated 60/50Hz from stock, Elektrim IEC frame motors offer vacuum pressure impregnation for optimal electrical performance, oversized bearings on both ends for direct coupling, IP55 protection, and are backed by a 3-year warranty. Select from B3, B35, B34 or B34/1 mounting to replace or import in a variety of applications from pumps, conveyors, fans and more. Larger Elektrim Metric Motors, up to 4000HP, are also available upon request.
Metric motors can be modified from Footed to C-Face version or D-Flange and vice versa.
Notes: Click to view catalog notes.
Standard B5 D-Flange
Denoted by "MDM" in part number prefix, ex: 20MDM-3-3-18
Reduction B5 D-Flange
Non-standard reduced diameter B5 flange, denoted by "MDM" part number prefix and "/R" suffix, ex: 20MDM-3-3-18/R
Available IEC Motor D-Flanges
Standard B14 C-Flange
Denoted by "MCM" in part number prefix, ex: 20MCM-3-3-18
Increased B14 C-Flange
Non-standard increased diameter B14 flange, denoted by "MCM" part number prefix and "/1" suffix, ex: 20MCM-3-3-18/1
Available IEC Motor C-Flanges
Denoted by "MFM" in part number prefix, ex: 20MFM-3-3-18
Getting the right flange for your IEC Metric motor has never been easier. Elektrim offers both standard bracket, D-Flange and C-Flange motors as well as non-standard reduced and increased diameter flanges. Order flanges pre-installed or buy separately.