Elektrim Motors © 2015   All Rights Reserved.

Elektrim Motors is a trademark and business unit of Toolmex Industrial Solutions

Elektrim Motors designs and manufactures AC NEMA and Metric IEC motors up to 6300 HP in state-of-the-art ISO 9001 quality systems around the world.  Our enthusiasm for electric motors and commitment to exacting standards mean that Elektrim motors are some of the finest, longest lasting and best performing in the industry.  Elektrim Motors are field proven powerhouses, built to perform where others fail.

1-855-463-5358

Now, more than ever, it is imperative for pulp and paper mills and other wood products plants

to maintain reliable plant operation and steady production.

Limiting breakdowns and increasing equipment uptime is one of the single greatest opportunities for improvement. From high humidity to blistering heat, harsh chemicals and heavy loads, wood and paper machinery often operate in life-shortening conditions, stressing equipment into failure.  At Elektrim, we understand the need maintenance and plant managers have for equipment and motors capable of withstanding the extreme conditions typical of pulp and paper mills, plywood plants, sawmills and other wood products processing plants.  

 

Elektrim Motors are designed and manufactured by engineers for engineers, and are built to overcome harsh environments in mills and factories.  When other motor brands fail, Elektrim thrives.  It's why we're known as the unstoppable "blue" motor.

LUMBER AND PAPER INDUSTRIES

Need RUGGED, DEPENDABLE and TOUGH motors for brutal, dirty and corrosive environments and machinery

Elektrim IEC Frame Metric motors are designed to meet international standards (including EISA2007 and IE2 efficiency requirements) and are “the” replacement motors for overseas applications and machinery components. Dual rated 60/50Hz from stock, Elektrim IEC frame motors offer vacuum pressure impregnation for optimal electrical performance, oversized bearings on both ends for direct coupling, IP55 protection, and are backed by a 3-year warranty. Select from B3, B35, B34 or B34/1 mounting to replace or import in a variety of applications from pumps, conveyors, fans and more.

Elektrim IEC Large Frame Metric motors are designed for a variety of low voltage applications requiring a large frame, high efficient electric motor.  Available as foot mounted B3 or B35 flange in most sizes.  Available by special order.

Elektrim IEC Medium Voltage Metric motors are ideal for applications requiring Metric IEC high efficiency, reliability and low cost of ownership.  Available by special order.

Elektrim Performance Series Premium Efficient motors are the premier, top-of-the-line European designed and manufactured electric motor in the marketplace and are built to withstand the most-extreme applications. With its uniquely high service factor (up to 1.4), Elektrim Performance Series electric motors deliver worry-free starts under excessive load or poor supply conditions. Added performance enhancing-features such as more durable oversized bearings on both ends, high lock rotor torque, heat dissipating vacuum pressure impregnation, and dual-rating at 60/50 Hz without de-rating have earned Elektrim Performance Series electric motors its place as one of the best, pound for pound, motors in the industry.

Elektrim Severe Duty Premium Efficient motors provide built-for-life reliability in the harsh hard-wearing applications found in pulp and paper mills.  With its ultra-strong oversized bearings, labyrinth seal (324T and up), high starting torque and uniquely high service factor (up to 1.4), Elektrim Severe Duty motors guarantee rugged mechanical strength and optimum performance in the worst conditions.

Built big and tough, Elektrim Premium Efficient Brake motors are VPI applied, offer a service factor up to 1.4 and have one of the highest braking torques on the US Market. Available in 1-30HP with a 3-year warranty, Elektrim brake motors utilize oversized double-shielded bearings on both ends for increased electric motor life, outstanding durability and performance in applications where a quick stop and positive holding torque are a necessity.

Elektrim Motors are ideal for a wide variety of wood processing and pulp and paper mill equipment, including:

Elektrim NEMA and Above NEMA Medium Voltage Metric motors are ideal for applications requiring high efficiency, reliability and low cost of ownership.  Available by special order.

•   NEMA Premium® TEFC IP55

•   3600-1800-1200 RPM

•   Dual Rated 60/50 Hz

•   Inverter Rated 10:1CT 20:1VT

•   Service Factor up to 1.4

•   Vacuum Pressure Impregnation

•   Oversized Bearings on both ends

•   V-Ring or Labyrinth Seal

•   Moisture Resistant Tropicalization

•   575V Available

•   NEMA Premium® TEFC IP55

•   3600-1800-1200 RPM

•   Dual Rated 60/50 Hz

•   Inverter Rated 10:1CT 20:1VT

•   Service Factor up to 1.4

•   Vacuum Pressure Impregnation

•   Oversized Bearings on both ends

•   V-Ring or Labyrinth Seal

•   Moisture Resistant Tropicalization

•   Low Vibration Level <0.08 in/sec

•   575V Available

•   NEMA Premium® TEFC IP55

•   3600-1800-1200 RPM

•   Dual Rated 60/50 Hz

•   Inverter Rated 10:1CT 20:1VT

•   Service Factor up to 1.4

•   Vacuum Pressure Impregnation

•   Oversized Bearings on both ends

•   575V Available

•   TEFC IP55

•   3600-1800-1200 RPM

•   Dual Rated 60/50 Hz

•   Inverter Rated 5:1CT 10:1VT

•   Vacuum Pressure Impregnation

•   Oversized Bearings on both ends

•   575V Available

•   TEFC IP55 or Better

•   3600-1800-1200 RPM

•   Dual Rated 60/50 Hz

•   Inverter Duty Rated

•   Vacuum Pressure Impregnation

•   Oversized Bearings on both ends

•   TEFC Cast Iron Fin Frame

•   3600-1800-1200-900-750 RPM

•   Multiple Voltages Available

•   Service Factor 1.15

•   Vacuum Pressure Impregnation

•   Versatile Extra Mounting Holes

•   Quieter operation <85 dBA

•   TEFC Welded or Cast Iron Frame

•   2-4-6-8-10 Pole

•   Multiple Voltages up to 11kV

•   Vacuum Pressure Impregnation

•   Low Vibration Level <1.8mm/s

•   Versatile Extra Mounting Holes

•   Winding and Bearing Protection

Want more?  

Check out the entire Elektrim motor line, or call 855-463-5358 to discuss a wide range of custom motor options and capabilities. 

Debarkers, Chippers, Log Canter Systems, Infeed Systems, Small Log Processors, Vertical and Horizontal Shape Saws, Conveyors, Gang Saws, Bark Hogs, Screens, Scragg Mills, Slasher Saws, Chamfering Machines, Notchers, Planers, Waste Hogs, Surfacers, Block Saws, Feed Tables, Log Shavers, Shaving Mills, Timber Sizers, Cyclones, Fans, Blowers, Dust Collection Systems, Wood Waste Systems, Hydraulic Power Units, Chop Saws, Slab Recovery Units, Bandmill Systems, Canters, Grinders, Crumblers, and so much more!

Click product headings to learn more about Elektrim electric motor product lines.

 
X
Password:
Wrong password.